|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
14 Ft 'Ski-Boy' Restore - Tiny-Tannic
|
 |
|
|
|
|
|
|
|
|
|
|
|
Joint glassed over
|
|
We vacuumed and wiped down with styrene before we applied resin and 2 layers of 7.5 oz clothe to the outside of the joint. This is the first time we have needed finishing resin, all of our other work will be glassed over again. So after we applied the resin and glass, we added finishing wax to the resin that was left (already catalyzed) and brushed on a coat of that. It all cured tack free very nicely.
On this vertical surface we used the 'wet' method to install the clothe. The resin we had painted on the area helped hold the clothe in place while we brushed on the remainder of the resin. There is a 2 inch wide piece of clothe and then a 4 inch wide piece of clothe in the joint.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
