|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
14 Ft 'Ski-Boy' Restore - Tiny-Tannic
|
 |
|
|
|
|
|
|
|
|
|
|
|
Laminating up both panels
|
|
We are using poly resin and one layer of cloth to laminate the two panels for the transom together. Jim Anderson's recommendation in Runabout Renovation is to use lots of screws and we did. Unlike Norm Abrahams, someone did not GIVE ME thousands of dollars worth of clamps, so we clamped one section tight and then screwed it together (Contrary to popular myth, screws WILL NOT PULL lumber together, unless you drill a clearance hole in the 1st layer of material.)
we kept moving the clamps around the job and followed with the screws to hold it together. There is one screw about every 6 inches.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
