Warning: Undefined array key "visitDate" in /home2/sap/public_html/header.php on line 6

Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612 home | shopping | contact | projects | login | join

14 Ft 'Ski-Boy' Restore  - Tiny-Tannic

Search Projects:   Share Thumbnails Slideshow Tutorial << >> Transom almost ready Here are both pieces of the new transom screwed together temporarily so we can check the fit. It took several hours to get the 1st piece sized right. Because we want a nice close / tight fit in the boat, we actually cut the 1st piece of plywood oversized and sanded it down gradually with the belt sander until we had a nice fit. Then all we had to do was transfer that shape to the second piece of plywood. Some of what complicated our measurements was accounting for the 14 degree transom angle. Being that the cardboard pattern is thin, it fits back up against the inside of the rear of the boat and it does not reflect the front edge of the plywood that is 3/4 of an inch in front of it and Longer because of the transom angle. We over compensated the length to account for the angle and wound up sanding alot of that off. << >>

All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way. Outdoor Blog