|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Chrysler 1969 Charger 151 Refit
|
 |
|
|
|
|
|
|
|
|
|
|
|
Stressing
|
|
August 30th, 2005:
After removing everything holding the top deck to the hull it still would not come off. The cause? A wayward previous owner had apparently tried to reinforce some minor dinging in the port rub rail area by smucking on some fiberglass cloth and resin. In the joint, 2-3 feet along the seam. It's only cloth and not mat, but where it is joining top to hull it is thin but solid. Grinding and cutting with a dremel tool would not separate it. There is no room for an angle grinder or anything else up under the section where the mess is. But, while picking away at it I discovered I could get a small section to peel away from the unblemished factory hull underneath. Whoever did this did not sand or anything, they just smeared it on over the old.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
