|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Reef Craft Restoration
|
 |
|
|
|
|
|
|
|
|
|
|
|
Cross-Members Out
|
|
It was time to start the work I really wanted to do�. So into the boat, and started the removal of Cross-Members. These came out by just pulling on them, except for one� That just needed a little nudge from my foot! Still came out very easily though� A little bit of a worry.
I was rather nervous about this step. I was not sure if the trailer would support it well enough with my weight wandering around inside the hull. I was trying to work out if it would be better supported on car tyres. However, I spoke to quite a few people, and they all said to leave the hull on the trailer. I was warned that the hull will �flex� a bit as I�m wandering around, so I was not too worried when it happened.
This photo was taken just after the last Cross-Member was taken out. That floor at the back has to come out as well�
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
